Post Notes: as of RouterOS 7.18 – ip – added support for /31 address
Contents:
Mikrotik WireGuard Interface Setup
In this guide, I’ll show you how to easily set up a VPN tunnel using WireGuard between a Windows PC and a MikroTik router. Whether you need to manage your router remotely or access hosts on your network from anywhere, this tutorial will covers each aspect and aims to simplify the steps to make it easy for anyone at any skill level.
Continue reading
Post Notes: as of RouterOS 7.18 – ip – added support for /31 address
The steps below aim to illustrate how to setup a site to site VPN between two Mikrotik devices using WireGuard. Pre-existing local networks and firewalls exist on both R1 and R2. Between R1 and R2 the WireGuard tunnel will use 172.17.0.0/30. R2 has 172.17.0.1 assigned to its WireGuard interface, while R1 has 172.17.0.2 assigned to its WireGuard interface. The network used, or the order in which IP addresses are assigned is not important, however it is considered best practice to use a point to point subnet between peers.
Continue reading